How To Reset Maintenance Light On Toyota Tacoma 2015. Press the odo/ trip button briefly make sure you set this thing to the trip a. Keep pressing the reset button and gently press the on button.
Put the ignition key into the slot and turn on the car without kicking off the engine. After the oil change, you can reset the light as follows: Use the arrows to select “ maintenance reset “, then press.
Table of Contents
Push And Hold The Trip Reset Or Mode Button.
While holding the trip meter reset nob, turn the ignition to ‘on’, but do not start your toyota tacoma. The odometer should read ‘trip. Then select the “maintenance reset” option and press the toyota select button.
It Is Tough On The Outside And Sophisticated On The Inside.
Keep pressing the reset button and gently press the on button. After the oil change, you can reset the light as follows: Insert the keys in the corolla.
How to reset maintenance light on toyota camry 2015. While still holding the trip stem button, turn the ignition to the on position. Toyota how to reset oil maintenance required light 2016 2019 from www.youtube.com.
Put The Ignition Key Into The Slot And Turn On The Car Without Kicking Off The Engine.
Once you’ve selected that gear, scroll down to settings and press enter. The odometer will display dashes that. Press the odo/trip button to display to odo.
Press The “ Power ” Button Once Without Holding The Brake To Activate The Electronics.
Go to the odometer and press the odometer to the “trip a” position, then turn the key “off”. Use the arrows to select “ maintenance reset “, then press. Follow these steps to turn off the light manually: